Filesystem Performance Benchmarking

Filesystem performance has a big impact on overall GitLab performance, especially for actions that read or write to Git repositories. This information will help benchmark filesystem performance against known good and bad real-world systems.

Normally when talking about filesystem performance the biggest concern is with Network Filesystems (NFS). However, even some local disks can have slow IO. The information on this page can be used for either scenario.

Write Performance

The following one-line command is a quick benchmark for filesystem write performance. This will write 1,000 small files to the directory in which it is executed.

  1. Change into the root of the appropriate repository storage path.

  2. Create a temporary directory for the test so it's easy to remove the files later:

    mkdir test; cd test
  3. Run the command:

    time for i in {0..1000}; do echo 'test' > "test${i}.txt"; done
  4. Remove the test files:

    cd ../; rm -rf test

The output of the time for ... command will look similar to the following. The important metric is the real time.

$ time for i in {0..1000}; do echo 'test' > "test${i}.txt"; done

real	0m0.116s
user	0m0.025s
sys	0m0.091s

From experience with multiple customers, the following are ranges that indicate whether your filesystem performance is satisfactory or less than ideal:

Rating Benchmark result
Best Less than 10 seconds
OK 10-18 seconds
Poor 18-25 seconds
Very poor Greater than 25 seconds